2-Nov-26 | Tips & Tricks

A Guide to Made-to-Measure Commercial Entrance Mats

Commercial Matting

Walk into any premium commercial building and the first thing you notice isn’t what’s there, it’s what’s missing. Standard off-the-shelf door mats rarely fit commercial thresholds perfectly. They shift, they bunch and they leave gaps.

That’s why custom, made-to-measure matting isn’t a luxury. In busy environments, it’s an architectural and safety necessity: a mat cut to fit the entrance stays put, looks like part of the building and gives visitors a flat, continuous surface to walk on.

But a made-to-measure mat only works as well as the measurements behind it. Get them right and your mat fits neatly, stays flat and does its job from day one.

There are two ways to fit a commercial entrance mat. Lift-and-lay mats sit directly on the floor, while recessed mats fit into an existing mat well. Each needs a different measuring approach: rubber-backed mats come with manufacturing tolerances, and suitable recessed matting needs a trimming allowance.

Take the time to measure properly and you’ll get a more professional finish, better dirt and moisture control, and longer-lasting interior floors.

Need an extra hand on sizing a commercial entrance mat? Follow our guide to measuring out commercial recessed mats, including key allowances to consider before ordering, for a neat fit and a professional entrance.

Key steps are highlighted to make the process as smooth as possible and ensure a fantastic looking finish for your business.

How to Measure for Lift-and-Lay Entrance Mats

Lift-and-lay mats are loose-laid entrance mats with a backing and finished borders, placed straight onto the floor.

Measure the Available Floor Space

Measure the width and length of the area where the mat will sit. Check door clearance, nearby walls, thresholds and anything else that could get in the way. Remember that the space available and the size you order may differ slightly because of manufacturing tolerance, so always confirm whether quoted dimensions include the rubber borders.

Allow for Manufacturing Tolerances

Heat-moulded nitrile rubber-backed mats can finish slightly larger or smaller than their ordered size, typically by around ±2% to ±5% depending on the product. Measure accurately but allow for that variation. If the mat is going into a tight or restricted space, check the tolerance for your chosen product before ordering.

Choose Enough Width and Walking Length

Fitting the space isn’t the same as providing enough matting to clean shoes effectively. Your mat should cover the main walking route so visitors naturally step onto it. As a general guide, aim for a mat that covers 80–100% of the doorway width. Length matters too: the longer the mat, the more steps each visitor takes on it, and the more dirt it removes.

How to Measure for Recessed Entrance Mats

Recessed mats sit in a well in the floor, so you’ll need to check width, length and depth.

Measure the Width and Length in Three Places

Recesses are often slightly uneven or out of square, so a single measurement isn’t enough.

  • Measure the width at the top, middle and bottom of the recess.
  • Measure the length along the left, middle and right.
  • Record all six measurements.
  • For matting supplied oversize for trimming, use the largest width and largest length as your starting dimensions, however, let your mat supplier know all the different dimensions so they can advise on the best size to order.

doorway entrance mat measurement guide

Measure across three points in each direction. For suitable matting supplied for trimming, use the largest measurement for each dimension.

Add a Trimming Allowance Where Required

Suitable recessed matting is usually ordered slightly oversized and trimmed on site for a snug fit. You will be advised during the quoting stage, what extra measurements should be added to your mat, depending on the product.

Check the Recess Depth and Finished Floor Level

Measure from the base of the recess to the surrounding finished floor, then compare this with the thickness of your chosen mat. The aim is a flush finish with no lip to catch feet. If the recess needs building up, confirm a suitable, securely fitted base with your supplier or installer.

Provide the Original Recess Size for Logo Mats

For recessed logo mats, advise your mat provider on all the various measurements of your recess, not just the longest width and length. This ensures that the designer knows all variations to ensure that the logo is placed in the correct place and cannot be trimmed in areas accidentally.

Wiltshire Council recessed entrance mat

Why the Right Size Matters

A well-proportioned mat that lines up neatly with your doorway looks deliberate, not like an afterthought. Made-to-measure sizing suits narrow, wide and unusually shaped entrances that standard sizes can’t.

Optic Paris entrance mat

Capture More Dirt and Moisture

The wider and longer the mat, the more contact it has with visitors’ shoes. If part of the walking route is left uncovered, dirt and water simply bypass the mat and end up inside.

The Long-Term ROI of Made-to-Measure

Custom-sized mats last longer because they don’t shift out of place or suffer the edge-wear that comes with it. They also protect expensive interior flooring, from hardwood to carpet and tile, by capturing dirt and water right at the perimeter, before it can cause soiling and abrasive wear further in.

Help Reduce Slip and Trip Risks

A mat that lies flat, has a suitable backing and finished edges, or sits at the correct recess depth, is less likely to cause trips. Correct sizing works best alongside proper installation, regular cleaning and good maintenance.

Choosing the Right Material for Your Commercial Entrance

Once you know your size, choose a material that suits your entrance and footfall.

Option What to consider
Custom coir matting Excellent scraping action and a traditional look. Available in different thicknesses, so check it suits your location and recess depth.
Heavy-duty barrier matting

 

Strong dirt and moisture control for busy entrances. Consider traffic levels, cleaning needs and whether you need lift-and-lay or recessed fitting.
Custom logo mats

 

Adds branding across suitable mat types. Plan artwork positioning and allow for borders or trimming.

Get Help Choosing Your Made-to-Measure Entrance Mat

Not sure about your measurements or which mat to choose? Send your measurements, a few photos of your entrance and your fitting requirements to the Mats Nationwide team. We’ll help you confirm tolerances, trimming allowances and material suitability before you order, so your mat fits first time.

Browse our made-to-measure range or contact us today.